PROBLEMS AND PROSPECTS IN THE FIELD OF IONIZING RADIATION MEASURING INSTRUMENTS TESTING FOR TYPE APPROVAL
Journal: ANRI
№ 3
, 2023
Rubrics: SCIENTIFIC ARTICLE
Authors:
1.
D.I. Mendeleyev Institute for Metrology (VNIIM)
2.
D.I. Mendeleyev Institute for Metrology (VNIIM)
3.
D.I. Mendeleyev Institute for Metrology (VNIIM)
4.
D.I. Mendeleyev Institute for Metrology (VNIIM)
Russian Federation
Russian Federation
5.
D.I. Mendeleyev Institute for Metrology (VNIIM)
6.
D.I. Mendeleyev Institute for Metrology (VNIIM)
7.
D.I.Mendeleyev Institute for Metrology (VNIIM)
Russian Federation
Russian Federation
8.
D.I. Mendeleyev Institute for Metrology (VNIIM)
Russian Federation
Russian Federation
9.
D.I. Mendeleyev Institute for Metrology (VNIIM)
10.
D.I. Mendeleyev Institute for Metrology (VNIIM)
11.
STC “Nuclear Physics Research” (YAFI)
Russian Federation
Russian Federation
Type:
Article
Pages:
from 56
to 64
Status:
Published
Received:
17.08.2023
Accepted:
20.08.2023
Published:
20.08.2023
Subject area:
UDK 539.1.074 Счетчики и детекторы частиц. Дозиметры излучений. Радиометры
Language:
Russian
Keywords:
ensuring the uniformity of measurements, type approval, state regulation, nuclear materials monitors, measuring instrument
Abstract (English):
The presented work is a continuation of the article with the identical title [1] and is devoted to the features of metrological support for monitors, identifiers and other devices for detecting radioactive substances, sources and nuclear materials. As a departure from the intended content of the article, the discussion of issues related to the metrological support of comparators and nuclear medicine radiometric devices will be published separately. Detailed analysis of the document, approved by Order of the Federal Agency for Technical Regulation and Metrology No. 3341 of December 30, 2022 [2], and practical aspects of its application is planned to be put in a separate article.
The presented work is a continuation of the article with the identical title [1] and is devoted to the features of metrological support for monitors, identifiers and other devices for detecting radioactive substances, sources and nuclear materials. As a departure from the intended content of the article, the discussion of issues related to the metrological support of comparators and nuclear medicine radiometric devices will be published separately. Detailed analysis of the document, approved by Order of the Federal Agency for Technical Regulation and Metrology No. 3341 of December 30, 2022 [2], and practical aspects of its application is planned to be put in a separate article.
Keywords:
ensuring the uniformity of measurements, type approval, state regulation, nuclear materials monitors, measuring instrument
ensuring the uniformity of measurements, type approval, state regulation, nuclear materials monitors, measuring instrument
1. Shil'nikova T.I., Alekseev I.V., Arshanskiy S.M., Domarackiy V.P., Zhukov G.V., Moiseev N.N., Oborin A.V. Problemy i perspektivy v oblasti ispytaniy SI ioniziruyuschih izlucheniy v celyah utverzhdeniya tipa. Chast' 1//ANRI. 2022. № 2(109). S. 49-60.
2. Prikaz Federal'nogo agentstva po tehnicheskomu regulirovaniyu i metrologii № 3341 ot 30 dekabrya 2022 g. № 102-FZ «Ob obespechenii edinstva izmereniy».
3. Postanovlenie Pravitel'stva RF ot 16 noyabrya 2020 g. № 1847.
4. Prikaz Federal'noy sluzhby po ekologicheskomu, tehnologicheskomu i atomnomu nadzoru ot 21 iyulya 2017 goda № 277.
5. Prikaz Minpromtorga ot 25 iyunya 2013 goda № 971.
6. GOST R 51635-2000. Monitory radiacionnye yadernyh materialov. Obschie tehnicheskie usloviya.
